Lancia Stratos HF
“The Stratos was a monster, but it was, at the same time, easy to understand.”
— Sandro Munari, Former Lancia Rally Driver
“Fiorio envisioned a purpose-built rally car inspired by the Stratos Zero and the result a year later was the Stratos HF, or “High-Fidelity.” The stubby, lightweight car had a short wheelbase to help it rotate with style on tight dirt-road corners, a central steel monocoque with tubular rear sub-frame, and a fiberglass body that still stirs the imagination. Most importantly, successful negotiations with Enzo Ferrari, who initially considered the Stratos a potential rival for his Dino, meant the 195 horsepower 2.4-liter Dino V6 was made available.
…In Munari’s hands, the factory-backed Stratos won the Monte Carlo rally three times, 1975, ’76, and ‘77. Entered by French privateer Chardonnet in 1979, Stratos again won the Monte. If not for internal Fiat group politics, which dictated a shift to Fiat for rally efforts, Stratos would have continued its winning ways till the rules were changed to allow all-wheel drive, which ushered in the original Audi Quattro. Along with the Quattro and the Peugeot 205 T16 that made Group B rallying so famous, Stratos defined modern rally, and is arguably the best of the cars built before rules changes allowed all-wheel drive. Best of all, it won on the old, original and extremely brutal rally circuits, not the abbreviated courses now used to make the sport more TV-friendly.”
– Mark Ewing, Forbes
40.5cm x 50.8cm |16" x 20"
Museum-quality posters printed on thick archival matte paper.
- Paper thickness: 0.26mm | 10.3 mil
- Paper weight: 189 g/m² | 5.57 oz/y²
- Opacity: 94%
- ISO brightness: 104%
- Paper is sourced from Japan
This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!
Please note: This print is shipped rolled, in a heavyweight transport tube.
It's advised to either reverse roll, or press with heavy flat object overnight. The edge of the paper may have a visible border to ensure correct trimming by the printer. You can trim this border with a sharp blade, or leave it if your frame has a matboard.