According to Derek Gardner, the man behind the P34’s revolutionary design concept, Jackie Stewart had a “fit of choking” when, on a flight home from the 1975 South African Grand Prix, the designer snuck into the first class section of the plane and informed the retired three-time world champion of his outlandish plans for Tyrrell’s next challenger. But what had convinced Gardner to think so radically? Put simply: F1’s increasingly level playing field.
In the mid-Seventies almost every team on the grid (save Ferrari) was using the same Cosworth DFV engine, the same Hewland gearbox and the same Goodyear tyres, meaning that it had become extremely hard to find what Gardner termed ‘an unfair advantage’. Thinking outside the box, the designer revisited an idea he had first conceived while thinking up a way to improve the handling on Lotus’s four-wheel-drive gas turbine IndyCar of 1968 – a six-wheeled car.
“I did some calculations, and concluded that if I had a car with four small front wheels, contained within the width of the bodywork, I could reduce the amount of lift generated by normal front wheels,” Gardner told Autosport magazine. “That in turn would allow me to back off on the front aerodynamics. And, hey presto, the figure I came up with was the equivalent of 40-odd horsepower!”
– Jonny Reynolds, Formula1.com
40.5cm x 50.8cm |16" x 20"
Museum-quality posters printed on thick archival matte paper.
- Paper thickness: 0.26mm | 10.3 mil
- Paper weight: 189 g/m² | 5.57 oz/y²
- Opacity: 94%
- ISO brightness: 104%
- Paper is sourced from Japan
This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!
Please note: This print is shipped rolled, in a heavyweight transport tube.
It's advised to either reverse roll, or press with heavy flat object overnight. The edge of the paper may have a visible border to ensure correct trimming by the printer. You can trim this border with a sharp blade, or leave it if your frame has a matboard.